Black Friday - TV BOX Flash Deals In GeekBuying, Daily Updated, Qty Limited.


Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: Digital2 Platinum 751G at BigLots 8G/dual core/1G ram/ 1024 x 600

  1. #1
    Junior Member
    Join Date
    Apr 2012
    Location
    California
    Posts
    25

    Digital2 Platinum 751G at BigLots 8G/dual core/1G ram/ 1024 x 600

    Happened to see this at BL last week. This is supposed to be "released" on 8/11 according to Digital2 support. $99. Notihing listed on the d2pad.info site.

    Anyone have any experience with Digital2 "brand"?

    Although I returned the Polaroid 720 dual core because the battery time was poor, I did like the hdmi out and the speed that tablet offered.

    Antutu rating 8900. Need to root to get battery rating.

    This 751g works smoothly - 1.2ghz dual core ARM7 chip with Mali 400 gpu, got over 3 hours battery with constant use inc wifi. No hdmi, unfortunately but does have microsd in, headphones and usb connection box says there is a mic input but not there unless in with headphone jack. Also has mic and 2 cameras - .3M on front and 2M on back.

    G sensor very responsive and internet use very smooth. Viewing movies also very good with no skipping. Have yet to try Netflix.

    Made an attempt to root but windows is being very tough to get adb working. Mac OSX got the adb shell right away but I have yet to figure out how to root using adb. Tried to remount and -rw to system folder but have yet to get it to work. I must be doing something wrong. Any help would be appreciated.

  2. #2
    Junior Member
    Join Date
    Jun 2013
    Location
    Yes
    Posts
    9
    avgary: Wow! You are ahead of even the Internet on this one! I can't find a trace of this tablet anywhere in Google. Is it called the "D2-751G" or the "D2-751"?

    AFAIK Digital2 is just a renaming of the old Diablotek company. I've always been pretty satisfied with their hardware, albeit it's being pretty low-end. I have one of the ancient D2Pad tablets with the 1.2Ghz processor and 1GB of RAM - with a DPI tweak and the Play store hacked onto it, it wasn't bad. That was the first cheaptab I ever messed with

    May have to go to Big Lots and get hands-on with this new unit! Though TBH I don't think it's going to displace the Sero 7 Lite and Sero 7 Pro from my cheap clutches

    Also, I have seen a nice new method of one-step rooting that uses the recently discovered "end-to-end" vulnerabilities in Android - care to give that method a try? I've successfully used it to root two tablets so far...

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Location
    California
    Posts
    25
    Thread Starter
    Yes, the unit is not "out there" which is why I took a look at it. The problem I have is that there is a driver issue between the mtp and adb drivers. Can't get a windows machine to view it - xp or win7 - in adb. I have tried to rewrite the inf file to change the way the drivers read but they will not work and there is no way to turn off the mtp setting on this tab. It works ok as a media device without turning on usb developer but screws up if you want to get into adb. Maybe I am doing something wrong on the windows side.

    Adb works on the mac side but I have yet to find an exploit that works on the mac to root the tablet. Tried to do it manually but have not been able to change permissions on the tab side.

    All in all, a big PIA.

  4. #4
    Junior Member
    Join Date
    Jul 2012
    Location
    indiana
    Posts
    4

    D2-751G_MZ from big lots

    Here is the hardware info from the tablet that I purchased, I am still debating keeping it or not as I am unsure if I like the screen.

    What has me stumped is its advertised as 1024x768 and 1.5Mhz speed
    • Model #: D2728GMG but was 751g instead

    http://www.biglots.com/p/c/as-advert...ified-7-tablet



    GREATWALL DIGITAL2 PLATINUM


    SYSTEM (Android 4.1.1)
    Model: Digital2 Platinum
    Manufacturer: GREATWALL
    Device: d2PAD
    Product: d2PAD
    Brand: Digital2
    Android Version: 4.1.1 (Jelly Bean)
    API Level: 16
    Build ID: JRO03C
    Fingerprint: Digital2/d2PAD/d2PAD:4.1.1/JRO03C/20130617.v014:user/release-keys


    DISPLAY (976x600)
    Size: 976x600
    Refresh Rate: 60 Hz
    Default Orientation: Portrait
    Physical Size: 6.55" (16.65 cm)
    Logical Size: Large
    Density: 160 dpi (Medium)
    Pixels Per Inch: X: 168.89; Y: 177.21


    PROCESSOR (ARMv7)
    Processor: ARMv7 Processor rev 0 (v7l)
    Cores: 2
    Max Frequency: 1200 Mhz
    Instruction Sets: armeabi-v7a, armeabi
    SIMD Instructions: NEON


    MEMORY (915 MB)
    System RAM: 915 MB
    JVM Max Memory: 48 MB
    Internal Storage: 304 MB
    External Storage: 4076 MB


    BACK CAMERA (1.9 megapixel)
    Antibanding: 50hz
    Antibanding Values: 50hz, 60hz
    Auto Convergence:
    Auto Convergence Mode:
    Auto Exposure Lock: False
    Auto Exposure Lock Supported:
    Auto Whitebalance Lock: False
    Auto Whitebalance Lock Supported:
    Brightness: 50
    Camera Name: Camera
    Contrast: 100
    Effect: None
    Effect Values: None, Negative, Sepia
    Exif Make: GREATWALL
    Exif Model: Digital2 Platinum
    Exposure: Auto
    Exposure Compensation: 0
    Exposure Compensation Step: 1
    Exposure Mode Values: Auto
    Focal Length: 4.31
    Focus Distances: 0.95, 1.9, Infinity
    Focus Mode: Fixed
    Focus Mode Values: Fixed
    Gbce: Disable
    Horizontal View Angle: 54.8
    Ipp: Ldc Nsf
    Ipp Values: Ldc Nsf
    Iso: Auto
    Iso Mode Values: Auto
    Jpeg Quality: 90
    Jpeg Thumbnail Height: 120
    Jpeg Thumbnail Quality: 90
    Jpeg Thumbnail Size Values: 160x120, 0x0
    Jpeg Thumbnail Width: 160
    Manual Convergence Values:
    Max Exposure Compensation: 4
    Max Framerate: 15
    Max Num Detected Faces Hw: 0
    Max Num Detected Faces Sw: 0
    Max Num Focus Areas:
    Max Num Metering Areas:
    Max Zoom: 10
    Min Exposure Compensation: 4
    Min Framerate: 10
    Orientation: 90
    Picture Format: Jpeg
    Picture Format Values: Jpeg
    Picture Size: 1600x1200
    Picture Size Values: 1600x1200, 800x600
    Preview Format: Yuv420sp
    Preview Format Values: Yuv420sp, Yuv420p
    Preview Fps Range: 5000, 26623
    Preview Fps Range Values: (5000, 26623)
    Preview Frame Rate: 15
    Preview Frame Rate Values: 10, 15
    Preview Size: 640x480
    Preview Size Values: 352x288, 640x480, 176x144
    Recording Hint:
    S3d Supported:
    S3d2d Preview:
    S3d2d Preview Values:
    Saturation: 100
    Scene Mode: Auto
    Scene Mode Values: Auto
    Sensor Orientation:
    Sensor Orientation Values:
    Sharpness: 100
    Smooth Zoom Supported: False
    Vertical View Angle: 42.5
    Video Frame Format: Yuv420sp
    Video Size: 640x480
    Video Snapshot Supported: False
    Video Stabilization: False
    Video Stabilization Supported: True
    Whitebalance: Auto
    Whitebalance Values: Auto, Daylight, Incandescent, Fluorescent
    Zoom: 0
    Zoom Ratios: 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300,
    Zoom Supported: True


    FRONT CAMERA (0.3 megapixel)
    Antibanding: 50hz
    Antibanding Values: 50hz, 60hz
    Auto Convergence:
    Auto Convergence Mode:
    Auto Exposure Lock: False
    Auto Exposure Lock Supported:
    Auto Whitebalance Lock: False
    Auto Whitebalance Lock Supported:
    Brightness: 50
    Camera Name: Camera
    Contrast: 100
    Effect: None
    Effect Values: None, Negative, Sepia
    Exif Make: GREATWALL
    Exif Model: Digital2 Platinum
    Exposure: Auto
    Exposure Compensation: 0
    Exposure Compensation Step: 1
    Exposure Mode Values: Auto
    Focal Length: 4.31
    Focus Distances: 0.95, 1.9, Infinity
    Focus Mode: Fixed
    Focus Mode Values: Fixed
    Gbce: Disable
    Horizontal View Angle: 54.8
    Ipp: Ldc Nsf
    Ipp Values: Ldc Nsf
    Iso: Auto
    Iso Mode Values: Auto
    Jpeg Quality: 90
    Jpeg Thumbnail Height: 120
    Jpeg Thumbnail Quality: 90
    Jpeg Thumbnail Size Values: 160x120, 0x0
    Jpeg Thumbnail Width: 160
    Manual Convergence Values:
    Max Exposure Compensation: 4
    Max Framerate: 15
    Max Num Detected Faces Hw: 0
    Max Num Detected Faces Sw: 0
    Max Num Focus Areas:
    Max Num Metering Areas:
    Max Zoom: 10
    Min Exposure Compensation: 4
    Min Framerate: 10
    Orientation: 270
    Picture Format: Jpeg
    Picture Format Values: Jpeg
    Picture Size: 640x480
    Picture Size Values: 640x480
    Preview Format: Yuv420sp
    Preview Format Values: Yuv420sp, Yuv420p
    Preview Fps Range: 5000, 26623
    Preview Fps Range Values: (5000, 26623)
    Preview Frame Rate: 15
    Preview Frame Rate Values: 10, 15
    Preview Size: 640x480
    Preview Size Values: 320x240, 352x288, 640x480, 176x144
    Recording Hint:
    S3d Supported:
    S3d2d Preview:
    S3d2d Preview Values:
    Saturation: 100
    Scene Mode: Auto
    Scene Mode Values: Auto
    Sensor Orientation:
    Sensor Orientation Values:
    Sharpness: 100
    Smooth Zoom Supported: False
    Vertical View Angle: 42.5
    Video Frame Format: Yuv420sp
    Video Size: 640x480
    Video Snapshot Supported: False
    Video Stabilization: False
    Video Stabilization Supported: True
    Whitebalance: Auto
    Whitebalance Values: Auto, Daylight, Incandescent, Fluorescent
    Zoom: 0
    Zoom Ratios: 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300,
    Zoom Supported: True


    SENSORS (2)


    STK831X ACCELEROMETER
    Vendor: Sensortek
    Range: 58.87 m/sē
    Resolution: 1.0 m/sē
    Power: 0.151 mA
    Delay: 10000 μs


    2AXIS ORIENTATION SENSOR
    Vendor: Amlogic
    Range: 360.0°
    Resolution: 1.0°
    Power: 0.0 mA
    Delay: 10000 μs


    OPENGL 1.X (Mali-400 MP)


    GENERAL
    Renderer: Mali-400 MP
    Version: OpenGL ES-CM 1.1
    Vendor: ARM


    LIMITS
    Texture Size: 4096x4096
    Texture Units: 8
    Viewport Size: 4096x4096
    Modelview Stack Depth: 32
    Projection Stack Depth: 32
    Texture Stack Depth: 32
    Lights: 8


    COMPRESSED TEXTURE FORMATS
    ETC1, Paletted


    EXTENSIONS
    GL_EXT_debug_marker GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_size_array GL_OES_point_sprite GL_OES_texture_npot GL_OES_query_matrix GL_OES_matrix_palette GL_OES_extended_matrix_palette GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_draw_texture GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_framebuffer_object GL_OES_stencil8 GL_OES_depth24 GL_ARM_rgba8 GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_OES_texture_cube_map GL_EXT_discard_framebuffer GL_EXT_robustness


    OPENGL 2.0 (Mali-400 MP)


    GENERAL
    Renderer: Mali-400 MP
    Version: OpenGL ES 2.0
    Vendor: ARM
    GLSL Version: OpenGL ES GLSL ES 1.00


    LIMITS
    Texture Size: 4096x4096
    Texture Units: 8
    Vertex Textures: 0
    Combined Textures: 8
    Viewport Size: 4096x4096
    Renderbuffer Size: 4096x4096
    Cubemap Size: 1024x1024
    Vertex Attributes: 16
    Vertex Uniforms: 256
    Varying Vectors: 12
    Fragment Uniforms: 256


    VERTEX NUMERIC PRECISION
    Int: [-2^24, 2^24]
    Float: [-2^127, 2^127], 2^-23


    FRAGMENT NUMERIC PRECISION
    Low Int: [-2^11, 2^11]
    Medium Int: [-2^11, 2^11]
    High Int: Not available
    Low Float: [-2^15, 2^15], 2^-10
    Medium Float: [-2^15, 2^15], 2^-10
    High Float: Not available


    COMPRESSED TEXTURE FORMATS
    ETC1


    EXTENSIONS
    GL_EXT_debug_marker GL_OES_texture_npot GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness


    GRAPHIC MODES (RGBA 32bit)
    RGB 16bit (565)
    RGB 16bit (565), Depth 24bit, Stencil 8bit
    RGB 16bit (565), Depth 24bit, Stencil 8bit, Samples x4
    RGB 16bit (565), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
    RGBA 16bit (5551), Depth 24bit, Stencil 8bit
    RGBA 16bit (5551), Depth 24bit, Stencil 8bit, Samples x4
    RGBA 16bit (5551), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
    RGBA 16bit (4444), Depth 24bit, Stencil 8bit
    RGBA 16bit (4444), Depth 24bit, Stencil 8bit, Samples x4
    RGBA 16bit (4444), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
    RGB 32bit (888)
    RGB 32bit (888), Depth 24bit
    RGB 32bit (888), Depth 24bit, Stencil 8bit
    RGBA 32bit (8888)
    RGBA 32bit (8888), Depth 24bit, Stencil 8bit
    RGBA 32bit (8888), Depth 24bit, Stencil 8bit
    RGBA 32bit (8888), Depth 24bit, Stencil 8bit
    RGBA 32bit (8888), Depth 24bit, Stencil 8bit, Samples x4
    RGBA 32bit (8888), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant


    FEATURES (21)


    GRAPHICS
    OpenGL 2.0


    ANDROID HARDWARE
    android.hardware.camera
    android.hardware.camera.front
    android.hardware.faketouch
    android.hardware.location
    android.hardware.location.network
    android.hardware.microphone
    android.hardware.screen.landscape
    android.hardware.screen.portrait
    android.hardware.sensor.accelerometer
    android.hardware.touchscreen
    android.hardware.touchscreen.multitouch
    android.hardware.touchscreen.multitouch.distinct
    android.hardware.touchscreen.multitouch.jazzhand
    android.hardware.usb.accessory
    android.hardware.usb.host
    android.hardware.wifi


    ANDROID SOFTWARE
    android.software.live_wallpaper
    android.software.sip
    android.software.sip.voip


    GOOGLE
    com.google.android.feature.GOOGLE_BUILD


    Created with Hardware Info 2.1.7

  5. #5
    Junior Member
    Join Date
    Apr 2012
    Location
    California
    Posts
    25
    Thread Starter
    I was confused by that too as it was listed for $89.99 in the Big Lots ad today.

    I'd be curious to know if you can get adb to work with a pc because as I said before I had a conflict with the mtp driver and the adb driver. As long as I did not turn on usb developer setting, mtp worked and the tab came up as a Digital2 Platinum portable device.

    You could not turn off mtp setting even though there was a check mark, even after resetting the tab.

    There is NO SUPPORT on the d2info site.

    I am thinking about the lowered price on the Sero 7 Pro, if I can get it. Also wish Polaroid put out their M7 which seems more like a dream than anything else.

  6. #6
    Junior Member
    Join Date
    Aug 2013
    Location
    United States
    Posts
    4
    I too got one of these tablets at BL. My idea was to use it for an android project at work so I'd only brick a $89 tablet if i did something awful. It worked for two days (with no development being done on it yet) and now the best I can get it to do is lock up at the "Digital2" logo is I hold the power switch for about 10 seconds. Otherwise it is a brick. Any ideas? I tried combinations of buttons to get a hard reset but nothing works. Paperclip reset just shuts it off.

  7. #7
    Junior Member
    Join Date
    Apr 2012
    Location
    California
    Posts
    25
    Thread Starter
    Quote Originally Posted by android213 View Post
    I too got one of these tablets at BL. My idea was to use it for an android project at work so I'd only brick a $89 tablet if i did something awful. It worked for two days (with no development being done on it yet) and now the best I can get it to do is lock up at the "Digital2" logo is I hold the power switch for about 10 seconds. Otherwise it is a brick. Any ideas? I tried combinations of buttons to get a hard reset but nothing works. Paperclip reset just shuts it off.
    Sounds like a bad unit. I, too, tried a variety of things with the "hard" reset in the back but nothing happened except the unit turned off.

    You could try the d2info support. They responded to me the next day on an overnight email.

    Worst case, just swap it out. Better now than 30 days from now.

  8. #8
    Junior Member
    Join Date
    Aug 2013
    Location
    United States
    Posts
    4
    Quote Originally Posted by avgary View Post
    Sounds like a bad unit. I, too, tried a variety of things with the "hard" reset in the back but nothing happened except the unit turned off.

    You could try the d2info support. They responded to me the next day on an overnight email.

    Worst case, just swap it out. Better now than 30 days from now.
    Very likely it's bad. Digital2 replied to me with instructions for a hard reset. The logo was supposed to appear and then a menu. The logo appeared but no menu. I sent that information to them and no repose after that.

    What I can say happened is that I am sure the battery went dead overnight on Friday. It seems that if the battery drains out on this tablet it will never start up successfully again. It died overnight on Thursday and I had a heck of a time to start it on Friday, but thought it was a one time thing. It claims to be charging with their wall wart or USB but nothing more.

    Don't let the battery die or you will have a brick.

  9. #9
    Junior Member
    Join Date
    Aug 2013
    Location
    NJ
    Posts
    1

    Thumbs up Digital2 Tablet from Big Lots. Not good

    Since last Saturday I have had 3 of these. First one gave me trouble on 3rd day. It shut itself off, and took at least 10 seconds to get it to come back on. Within another 2 days, I could not get it to come back on at all. Had static logo with no boot to menu screen. Attempted to reset to no avail. Exchanged #1 at Big Lots yesterday. Brought #2 home, attempted to load micro SD card. Spring mechanism kept shooting it out across the room. Went right back to Big Lots for try #3. Brought it home, used it last night, shut it down, took a long time pressing in starter to get it to come back on this am. Was downloading some books, got a warning that it was at 14% power. Turned off app, as I did, static sound, went to black, have not been able to get it to come back on. Black screen even after attempt to charge and reset. Thing is garbage! Don't waste your time or money. I am going to return it today, get my $ back, and wait until Christmas to get Samsung Galaxy.

  10. #10
    Junior Member
    Join Date
    Jun 2013
    Location
    Yes
    Posts
    9

    Finally got to see one

    I finally got to lay eyes on one at a Big Lots, and you're right, it doesn't look like a "1024x768" format tablet to me - it looks more like a conventional (albeit maybe higher resolution) 7" tablet.

    Hey, look! The Digital2 site finally caught up with Big Lots: http://www.d2pad.info/index.php?opti...age&Itemid=425 - stuff there claims it's a 1024x600 display.

    Doesn't look like there's a firmware available for it anywhere on the site though

  11. #11
    Junior Member
    Join Date
    Jun 2013
    Location
    Yes
    Posts
    9

    Firmware! (And update for lock-up issue?)

    Hey, check this out!

    http://www.d2pad.info/index.php?opti...237&Itemid=423

    Looks like they made a recovery firmware available as part of an update! (Which may address the "locks up at the Digital2 logo" issue that you were reporting...)

    Now if only I could get hold of similar for the Polaroid PMID720

  12. #12

    YES... blasted Polatoid

    Quote Originally Posted by microwiz View Post
    Hey, check this out!

    http://www.d2pad.info/index.php?opti...237&Itemid=423

    Looks like they made a recovery firmware available as part of an update! (Which may address the "locks up at the Digital2 logo" issue that you were reporting...)

    Now if only I could get hold of similar for the Polaroid PMID720
    I can't believe they refuse to post a recovery for the PMID720.

  13. #13
    Senior Member
    Join Date
    Mar 2012
    Location
    Charlotte, NC USA
    Posts
    197
    Quote Originally Posted by kevanfl1234 View Post
    I can't believe they refuse to post a recovery for the PMID720.
    Hello!

    Don't hold your breath. For these guys, that's pretty much par for the course.

    The PMID706 has been out for months, and still no recovery image for IT, EITHER. A model is usually discontinued by the time (or before) a recovery image is released...

    73 DE N4RPS
    Rob

  14. #14
    Member
    Join Date
    Apr 2012
    Location
    Lordstown, OH
    Posts
    35

    D2 Platinum

    <p>
    Quote Originally Posted by microwiz View Post
    Hey, check this out! http://www.d2pad.info/index.php?opti...amp;Itemid=423 Looks like they made a recovery firmware available as part of an update! (Which may address the &quot;locks up at the Digital2 logo&quot; issue that you were reporting...) Now if only I could get hold of similar for the Polaroid PMID720
    Yeah I saw that on their website too. They seem to do more support for their tablets than Polaroid, but we shall see. I saw this one at Big Lots and told a buddy of mine that wanted one. He got it and had me load stuff to it for him, games and other apps. Seems pretty nice and does hold a charge better. I like the screen myself. Box says it&#39;s HD 1024 x 600 but I see thats not the case from the posts. I may drop my Polaroids and buy one. Anybody know who owns and where Digital2 is located? Looks to be CA since its hours are Pacific Time but that doesn&#39;t mean much.</p>
    <p>
    &nbsp;</p>
    <p>
    Anybody know if there is a chance of seeing the M series Polaroids anytime soon? Polaroid originally said summer but I bet they may wait until its closer to the holidays.</p>
    "It's full of stars!"

  15. #15
    Junior Member
    Join Date
    Aug 2013
    Location
    United States
    Posts
    4

    Support is great but....

    I'm on my third 751G and it just bricked last night! D2 has replaced the original tablet twice - quickly and without question (including a free PC videogame each time - I'm not a gamer so I don't know anything about them) but I think I'm done. I think I'll be returning both tablets on the prepaid UPS label they sent me and asking for a full refund. They did pre-ship tablet #3 in advance of my returning it. I haven't thrown #2 in the mail yet so I considering returning both of them.

    The third 751 definitely had updated firmware but I am now at the dreaded "logo lockup" once again. It seems that if the firmware decides the battery is "dead," whether it actually is or not, it puts the tablet into some kind of a lockup mode and it will never boot again. There is no hard reset. After about 30 seconds of holding the power button (and no matter what combination of volume buttons, time, what have you) you will get the Digital2 logo and that's where it stays forever. I left tablets 2 and 3, both fully charged, in the logo lockup state this morning before leaving for work in the hopes that the batteries would be fully drained and that might cause some sort of hard reset, but I am not hoprful.

    It's a shame, it's not a bad tablet when it works. But you get about a week and then it locks up. So to me it's a 39 cent chicken. Spend a few more bucks and get one that works.

  16. #16
    Junior Member
    Join Date
    Sep 2013
    Location
    Florida
    Posts
    1

    Angry Returning bricked 751g's back to BL.

    Finally had enough cash to get me one and picked me up one at BL. I noticed right off the bat the package had been opened and was suspicious. I open the box before I even left the parking lot. And just as I thought it was a used unit; obvious by the greese stains all over the inside packaging and manuals. Some fat phuck wanna be hacker just couldn't wait to wash his grubby lil hands before he molested it with his greedy filth. I had a gut feeling it was going to be defective as it was completely dead and had been obviously previously charged by some tub of lard punk. No battery indicator at all. Plugged it in to charge and nothing, no blinking battery, just a blank screen. I let it charge for a while and did all the reset tricks possible an nothing. It had been bricked and the little weesle didn't have the balls to be straight up and tell the clerk it didn't work. I exchanged it for the only other one they had, another opened unit, and to my demise it was bricked too. The lil punk probably did the same thing twice, freiking fatso idiot, didn't know what the heck he was doing. I ended up raising hell and got them to finally exchange it for the display unit, which worked for sure.

    Come on people be honest, as long as u have the receipt they'll take it back for crying out loud!

  17. #17
    Junior Member
    Join Date
    Jun 2013
    Location
    Yes
    Posts
    9
    Has anyone who has had the "lockup at logo" issue tried to apply the firmware update listed here?

    http://d2pad.info/index.php?option=c...237&Itemid=423

    I have a pretty well messed up PMID720 (and no firmware available, woohoo :P ) and am thinking I might just replace it with a D2-751G - at least there I can restore a factory firmware...

  18. #18
    Junior Member
    Join Date
    Sep 2013
    Location
    jersey shore
    Posts
    1

    Digital2 751G

    I bought one and exchanged 2 because it wouldn't even power up after charging it all day on both.
    The third I opened at big lots and it booted to an 85% charge.
    Its pretty smooth..Like it a lot so far(second day)...Was having trouble with loading Google plus and others with an error stating google services is not compatible with device..I followed directions with update and now it works like a charm. Im sure its rootable and it has a recovery so we can play and hopefully restore.
    Much better and faster than the 721..That crap went to a backlit screen of nothing after boot logo..had it for 6 months i think..They actually gave me store credit and got this one for another 7 dollars..Very happy with it so far

  19. #19
    Junior Member
    Join Date
    Aug 2013
    Location
    United States
    Posts
    4
    Quote Originally Posted by microwiz View Post
    Has anyone who has had the "lockup at logo" issue tried to apply the firmware update listed here?

    http://d2pad.info/index.php?option=c...237&Itemid=423

    I have a pretty well messed up PMID720 (and no firmware available, woohoo :P ) and am thinking I might just replace it with a D2-751G - at least there I can restore a factory firmware...
    Yes, and it does not work. The charging icon comes up and freezes as they say it should and that is where it stays forever.

    So no good.

  20. #20
    Junior Member
    Join Date
    Jun 2013
    Location
    Yes
    Posts
    9

    Unhappy

    Quote Originally Posted by android213 View Post
    Yes, and it does not work. The charging icon comes up and freezes as they say it should and that is where it stays forever.

    So no good.
    Crap. Yeah, that's no good.

    I may have to get my hands on one and see how easily it enters that state. I'm still poking Southern Telecom hoping that they'll release a PMID720 firmware (so I can try to un-f+ck the one I have), but before then at least having a tablet that I can do a restore on - as long as it doesn't brick - wouldn't hurt...

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •