PDA

View Full Version : MK809 4GB - Finless 1.5 (Imitio MX1) rom flash results, stock kernel



estebang
01-26-2013, 12:16 PM
Hi Bob,

Posting this outside the previous places used to discuss MK809s to avoid further hijacking and confusion to Imito and MK808 users. Any chance of a separate forum for MK809/MK809II?

Anyway, as per your earlier advice, I flashed Finless 1.5 with the kernel.img from a stock ROM. Process as follows:

Starting: stock MK809 firmware http://www.mk809.com/cs102/UploadFiles/rk3066_mk809_Launcher2_public_TFupgrade_20121121.z ip

CWM: flashed generic RK3066, ram-disk only, all working (MK809 version was frozen every time, may be a related issue) http://androtab.info/clockworkmod/rockchip/rk3066/

CWM: backed up to external SD (OK)
Finless Utility: replaced recover.img and kernel.img with those from my CWM backup.

Result: exactly the same as just flashing Finless 1.5. All looking good, but no wifi.

Any thoughts? I can provide the .imgs used if it might help.

Best,
Esteban

Finless
01-26-2013, 12:33 PM
We probably need a dump of styock system.img or a stock ROM download so I can pull the wifi drivers out of it.

Is that available?

Bob

estebang
01-26-2013, 12:45 PM
I can upload the stock update.zip to dropbox. Any good?

estebang
01-26-2013, 01:47 PM
PMd you the link

Finless
01-26-2013, 04:54 PM
Got it. So is this the MK809-2 or what?

Bob

tommeletbone
01-26-2013, 05:27 PM
hey there, i will jump on that train too.

i did the same, as above, but no wifi. I own an MK809 (same as MK809II, but no BT)

thanks in advance bob, you are a star!

estebang
01-27-2013, 01:38 AM
Bob,

This is the Mk809, version 1, 4 GB no Bluetooth. The ROM is a different download to that of the version 2. I sent you the stock ROM that I actually installed on my stick with working WiFi.

Thanks for taking an interest in this, let me know what else I can do to help.

Cheers
Esteban

Finless
01-27-2013, 01:39 PM
God I am getting confused with all these versions. Anyway I have it and wil try to get to making a ROM for it soon.

Bob

estebang
01-27-2013, 01:41 PM
Nice one, thanks a lot. And goodnight!

tommeletbone
01-27-2013, 03:42 PM
:CLAP:CLAP:CLAPThanx in advance! I volunteer for beta-testing, no prob.

estebang
01-28-2013, 01:54 PM
Hey,

I just flshed the 1.7 UG802 2dark finless 1.7 rom on MK809. Wifi works!

Sadly the Rockchips launcher and other bloat scared me off and I restored by flashing back my CWM recovery.img and then me full backup. Think I'll give the MK802III rom a go next.

Anyway, the drivers seem to be in the UG802 ROM and working with the 2dark kernel too. Maybe that helps if you have that one pulled apart already.

Best,
Esteban

tommeletbone
02-20-2013, 03:53 AM
:WTF

frydrik
03-26-2013, 12:54 PM
hello I have a mk809 not loading, shows only 2 penguins and make restart,
if you can give me a firmware that works 100%, so I can appreciate those with my mk809, thanks!

smokestack76
04-01-2013, 01:52 PM
Hey,

I just flshed the 1.7 UG802 2dark finless 1.7 rom on MK809. Wifi works!

Sadly the Rockchips launcher and other bloat scared me off and I restored by flashing back my CWM recovery.img and then me full backup. Think I'll give the MK802III rom a go next.

Anyway, the drivers seem to be in the UG802 ROM and working with the 2dark kernel too. Maybe that helps if you have that one pulled apart already.

Best,
Esteban

Just got my mk809 and it said compatible with UG802 finless ROMs lol. Maybe old news by now though!

yonasz
04-05-2013, 02:49 AM
Finless 1.8(ug802) works as well with mk809.

lin
06-05-2013, 12:28 AM
Finless 1.8(ug802) works as well with mk809.

Hi, can I use kernel (720p) from finless 1.8 ROM kit on my mk809 device.
If not, what kernel it the best for my mk809. Is default stock kernel (rooted) will work with all new features of a new ROM?